STAR TSP700II Thermische Bon Printer STAR TSP700II Thermische Bon Printer
STAR TSP700II Thermische Bon Printer STAR TSP700II Thermische Bon Printer
STAR TSP700II Thermische Bon Printer
Thermische Kassa Bon Printer
ā‚¬Ā 62,00 *
Prijs per stuk

STAR TSP700II Series Bon Printer

Thermische Bon Printer
Model: TSP700 Model II

Conditie: Occasion

Aansluiting: Serieel / Parallel / USB / Ethernet
Kleur: Zwart


Printer Method

Direct Line Thermal

Print Speed

48 Receipts Per Minute (250 mm/sec)

Printer Case Color


Model Available

Auto Cutter Only

Print Resolution
(Vertical x Horizontal)

203x203 dpi, 406x203 dpi

Two Color Print Capability

Red & Black / Blue & Black / Green & Black (Two color thermal paper required)

No. of Columns

48 / 64 or 58 / 71 (Depends on Paper Width)
Includes 1st column print for lottery applications

Font Size

12 x 24

Character Set

ANK 95, 32 Int 128 Graphic

International Code Pages

Star Mode=40. ESC/POS™= 6 + 1 blank allowing an additional character page to be added

Bar Codes

9 versions / PDF417, QR, Maxicode Options

Line Spacing

3 mm or 4 mm or programmable

Paper Specifications

Roll Diameter
Paper Out Sensor
Black Mark Sensor
Paper Low
Maximum Print Width

80mm standard, 82.5 and 58mm with paper guide 

0.065 ~ 0.15 mm
Up to 100 mm
"Drop-In & Print"
80mm paper = 72mm, 82.5mm paper = 80mm, 58mm paper = 52mm

Top Margin

13 mm minimum default (3mm selectable via Memory Switch Utility)

External Paper Feed Support


Auto Cutter

Guillotine (Full or Partial Cut Selectable)

Cover Open Sensor


Logo Store Capacity

2 Mbit Flash ROM with Graphic Management Software

Flash ROM

16 Mbit

Multiple Copy Support


Journal Capability


Label Support

Yes; Black timing marks between labels required

Power Supply

External; Requires PS60A External Power Supply

Drivers Available

Windows® XP 32 Bit, Vista 32/64 Bit, Windows 7 32/64 Bit, Server 2008 32/64 Bit, XP Embedded, CE, POSReady 2009, OPOS™, JavaPOS™, USB Vendor Class, Linux™, Mac OS X, StarIO SDK

Digitally Signed (WHQL)


Swappable Interfaces




Emulation Modes

Star Mode, ESC/POS™

Peripheral Drive Circuit  

2 circuits, (24V max. 1A), 1 Compulsion input

Power Consumption 

Average 1.8 Amp. Printing, 0.15 Amp. Standby
Requires PS60A External Power Supply

Operating Conditions 

Temperature: 5ºC to 45ºC 
Humidity: 10% - 90% RH (without condensation)

Storage Conditions

Temperature: -20ºC to 60ºC 
Humidity: 10% - 90% RH 


147mm(W) x 213(D) x 148(H) mm 
1.75 kg

Safety Standards

UL, C-UL, TüV, FCC, VCCI, EN55022, CE, Gost

Reliability MCBF
Auto Cutter

60 Million Lines 
2 Million Cuts 

Included with Printer

Installation CD with Drivers, Configuration Utility, and Value Add Utility modeled after futurePRNT Software, Wall Mount Bracket, Interface Cover, 58mm Paper Guide, Power Switch Cover, POwer supply unit, Parallel Cable